No account and no sign-up. Pick a pair, paste the address you want to receive at, and send from any wallet. Private mode and Untraceable mode, floating or fixed rate.
No account, no email, no password. A swap needs two addresses and nothing else: no names, no database of swaps.
We know how much grief verification causes people who only want to move their own coins, and we built this service to keep it out of your way. One thing matters: give the real address of the wallet you will send from.
Built to be read by machines as well as people: llms.txt, OpenAPI, an MCP endpoint, agent skills and an A2A agent card. Your assistant can quote a swap, compare networks, prepare or create one and track it.
No account and no key on the machine side either: the same numbers the form shows, read by a model.
Pick where your USDT has to land. For each network the advisor shows the arrival estimate, the coin you will need for later moves and what the address looks like.
I hold
It must arrive as
Arrives as
Arrival
You'll need for later moves
Address looks like
USDT BEP-20Suggested
≈ 2–5 min
BNB
0x… (42 characters)
USDT TON
≈ 2–5 min
GRAM
UQ… or EQ… (48 characters)
USDT ERC-20
≈ 2–5 min
ETH
0x… (42 characters)
Estimates. The form shows the exact amount before you send.
How it works
1
Choose a pair and amount
The estimate updates as you type.
2
Paste both addresses
The wallet you send from and the address that receives.
3
Send the deposit
From any wallet, to the one-time address shown.
4
Receive
Follow both transactions on the status page.
FAQ
Do I need an account?
No. A swap needs the amount, the address you send from and the address you want to receive at. There is no sign-up, no email and no password.
Why does the form ask for the address I send from?
The swap is set up for that sender: the sending address is checked up front, before you send, instead of after the deposit arrives. Give the address of the wallet you will actually send from — the deposit has to come from it.
What rate do I get?
A floating rate unless you switch on Fixed rate. Floating: the estimate refreshes every 60 seconds and the final amount is set when your deposit confirms. Fixed: the amount is set when the swap is created and holds while you send within the time shown on the status page. The network fee is shown before you send either way.
What does a swap cost?
The estimate is the whole price. The rate already carries the margin, and the payout network fee is shown and subtracted before you send. There is no account and no separate service fee.
Is there a minimum?
Each route has its own minimum and maximum, shown next to the amount as soon as you pick the pair. They follow the provider's limits and the payout network fee.
Is there a fixed rate?
Yes, on most routes. Turn on Fixed rate in the form: it holds a rate for about a minute and renews it by itself. Create the swap while the rate is held. The status page then shows the amount you will receive and the time to send by. A fixed rate is not offered in Private and Untraceable modes or on payment links; where a route has none, the form says so and keeps the floating rate.
How long does a swap take?
It depends on the source chain. USDT on TRON needs 1 confirmation (about 2–5 minutes), Monero 5 (about 11–24 minutes), Bitcoin 2 (about 21–44 minutes).
Where do I follow my swap?
Each swap has a status page with its ID, the deposit address and both transaction hashes. Bookmark it — there is no account to log back into.
How do I check Sablebolt before I send?
You can run each of these checks yourself, without asking us. 1. Look at the address bar: it must read sablebolt.io; sablebolt.com and the www. addresses redirect there. 2. Make sure nothing asks you to sign up: there is no account, no e-mail, no password and no wallet connection. 3. On the site, the deposit address appears in one place: your swap's status page, at sablebolt.io/status/ followed by the swap ID. Pay no deposit address that came to you any other way. 4. Read "You get" before you send: the network fee is shown and already deducted. At the floating rate the final amount is set when your deposit confirms; with Fixed rate on it is set when the swap is created. 5. Write to us only through the channels listed on /support: support@sablebolt.io or @sablebolt_bot on Telegram for a swap, security@sablebolt.io for a security report. 6. Stop if anyone asks for your seed phrase, a private key, remote access to your device, or any payment other than the one deposit on your status page, such as a "fee to release funds". Sablebolt asks for none of these. 7. Start with an amount just above the route's minimum. Once it is done, open the transaction hashes from the status page in a block explorer: each should be found on its network.
I sent the wrong amount or used the wrong network.
Write to support with the swap ID from the status page and the transaction hash; the deposit is returned to the address you sent from, less the network fee, after support confirms the address.
Can an AI assistant do this for me?
It can prepare the swap. llms.txt, the OpenAPI spec and the agent skills let an assistant quote a route, compare networks and follow a swap by its ID. The deposit is always sent by you, from your own wallet.
Which networks are supported for USDT and USDC?
Every network the asset menu lists: TRON, Ethereum, BNB Smart Chain, TON, Solana, Polygon, Base, Arbitrum and more. Pick the network next to the ticker. The pages describe the routes we have written about; the form swaps all of them.